Azure IoT DevKit – External Connectivity

Beyond the sensors built into the board the possibilities are endless when you consider attaching external devices. As I mentioned in my previous post, the DevKit has an edge connector with a number of input/output pins as well as power. You’ll need an “edge connector breakout” like this to make use of them.

I found this excellent post by Jeremy Lindsay which included a table of the pin numbers and how they map to Arduino pin names – you need this so that you can refer to a physical pin on the edge connector breakout to a pin in your Arduino sketch.

From this it’s possible to rig up an LED or similar on a breadboard and set it from code. One of the things I wanted to try out was using an ultra-sonic distance sensor and this is where I hit a snag. Unlike many Arduino boards there is no 5v output (even though it is driven from a USB 5v input) and the sensor I am using requires one. I’ve had to order a few more parts before I can make progress on this project. Essentially I’ll need a separate 5v supply to my breadboard and will have to convert the output from the sensor down to the 3.3v expected by the DevKit board.

One thought on “Azure IoT DevKit – External Connectivity

Comments are closed.